One, the installation method of solid wood composite floor

1. Determine whether the ground is level or not. Local leveling can be done for local unevenness. Self-leveling should be considered if large areas are uneven. The installation and use effect of solid wood composite flooring has a great relationship with the level of the ground.

2. If there is no problem with the ground, you can pave the floor directly after laying a special mat.

3. The solid wood composite floor has no keel, no nails, no glue. Leave an expansion joint of 8-12 mm between the floor and the wall, and add spring steel sheets and springs. Per hundred square meters: about 40 steel leaf springs and about 200 springs.

4. During the installation process, it is best to cover the installed part with cardboard or other things at any time, because many scratches happen like this. 5. Immediately clean the ground after the end and do floor maintenance in time.

Second, the installation method of solid wood floor

1. Lay the keel, the distance between the keels is determined according to the length of the floor. But it is best not to exceed 400MM.

2. Pay attention to check the keel fixation, and be sure to check it again and again. Once the keel fixation has problems, it is very troublesome to repair it later.

3. The installation of the keel should pay attention to leveling, and the uneven part of the ground should be handled well. Whether the keel is level or not is related to the stability and comfort of the floor.

4. Floor installation methods are divided into 1/2 and 3.6.9. The specific situation is determined according to the room area and floor specifications. It is best to ask the carpenter's advice on this point, they are very experienced.

5. The keel is divided into dry and wet. If you use wet wood, you must wait until the wood is completely dry before installing the floor.

6. Cover the installed part at any time to avoid scratches. 7. Do floor maintenance in time.